It is not at all necessary to wait for an experienced plumber when it is said about the usual mixer. Every home -made housewife can change it, since this is 5 minutes!
Materials and tools:
one. Ordinary divorce key
2. Insulating pack, sealing the composition for threaded joints
3. A fairly new mixer
Process:
one. Cross reinforcing valves for feeding cold or hot water, then so that it is also possible without emergency consequences to remove the damaged mixer.
2. We unscrew the steel bolts that hold the mixer. To do this, you need an ordinary divorce key.
3. So that the water does not proceed through combination, we wrap the cutting of the cranes of the updated mixer with a specialized sealing material (for example, linen thread or insulating packages). It is very necessary to wind in the direction of rotation of the nut – so that there is little pokli’s cut, and by the end – more – more. The layer should thicken as they screw. Then piss, so that there is no excessively many insulation pack: the cut should perform. To achieve the best effect, it is much better to an sealing composition for threaded joints at the top.
four. We install a fairly new mixer. The standardized size in our apartments between the centers of reinforcing valves of hot and cold water is 150 millimeters, however, foreign importers can become wider. If it so happened that the pipelines are not fastened to the water supply supply, use the appropriate adapters, or the bells that make it possible to adjust this difference (they are typically in the set). In the nut, do not forget to put the gasket made of rubber. So as not to scratch the metal, use a regular divorce key with a softener. Or it is not difficult to wrap the nuts with a rather soft cloth.
5. Open reinforcing valves, turn on the water, and also look, there are no leaks.
6. And if the water still seeps through rally, tighten the nut more. In the same case, if it does not help, block the water again, remove the mixer and, in addition, add in this place to the usual sealing composition.
The company presents a large list of services at low prices of good quality: the construction of country houses, baths, cottages made of round logs, as well as the construction of houses and cottages from turnkey beams.
