In a country or garden plot, a wooden cabin can be used for a shower, toilet, or as a barn for storing various garden equipment.
For the manufacture of a log house, eight logs are taken with a diameter of about 15 cm. Large of logs 2 meters. The log house is made two logs high. The connection of logs in the corners is performed using an ax in the type “in a cup”. After assembly, the log house is interconnected by nails. Then the log house is treated with a special protective impregnation.
For the manufacture of the main frame you will need a pine beam. The length of the beam is 2 meters, and the section 70*100mm. The beam is processed on four sides with a shirt or using a milling machine.
For a frame for a roof, a rubber board is used 1 meter long. Board width 10 cm, thickness 30mm. At the ends of the finished parts for the roof, openwork parts are cut out. Rooferoid is placed on top of the wooden surface of the roof. Then, slate is installed on top of the roofing material, metal tiles are also suitable. Slate is better to use colored or painted. Color choose a contrast. If necessary, a galvanized horse is screwed.
The door frame is made of two bars, in the same cross -section as the basin of the main frame. Brusyev length 2.2 meters. The bars are installed on the front wall of the log house at a distance equal to the width of the future door. The roof is collected from the inside using self -tapping screws and metal planks. Then the collected roof is attached to the main frame. After that, the roof is sheathed with a strict board or lining.
Paul in a wooden cabin is made from a pine -wrapped board, boards are strict from four sides. Paul boards are connected by the method “on the rail”. They are attached to the upper logs of the log house using nails. Blockhaus is used for lining the side and back walls. It is attached to the frame using self -tapping screws. Window frames are made from a pine beam. The door for a wooden cabin for a summer shower is collected from a blockhouse. Glasses are used corrugated and matte. Stained and colored glasses are well suited. Frames are installed from the inside using self -tapping screws. Door handles are cut out of curved trees.
Electricity is carried out for convenience and comfort in the cabin. The joints of the wires are thoroughly isolated and organized in the connecting box. The camshaft is installed on the inner wall, and the outlet and switch on the outer wall.