If your house has wooden structures that, for various reasons, have contact with brick or metal, then it is necessary to lay steam-insulation (permamine, film, roofing material). Vapor barrier, this is the upholstery of door and window boxes, as well as work on laying beams made of wood in stone walls.
Many people are subjected to the erroneous opinion that a roofing material must be laid between brickwork and a wooden wall, in which case, supposedly, there will be no dampness in the room. Remember that this cannot be done in any case. Thus, you will expose your damp housing even more, because condensate is formed on the roofing material, as a result of which the wooden wall will simply rot.
When working with vapor barrier, you must remember one very important rule: it is always necessary to lay vapor barrier from the side of the heat, otherwise the epic is completely opposite.
In order for the life of your fireplace or furnace to be much longer, it is necessary to apply chamotis brick or fireproof fuel in the overall structure. It is worth remembering that when laying a fireplace, furnace, etc.P. In no case should you bandage red brick with refractory, as they have different expansion coefficients. The entire whole row is performed by the material of the same type.
In order to increase the traction in the furnace, or in other words minimize the resistance of the gases, you can replace consistent channels with parallel.
If you are burning the desire to independently manufacture a water heating collate, then it is necessary that the area of its heat acceptance corresponds to 1 sq. m per 100 kV. m of the premises that are heated.
In the case of the surface area of the registers and radiators, the ratio should be 1: 4 (surface area to the area of the heated room). If you select Arbony radiators, check this information and sellers. For example, when using cast -iron radiators M140, one edge of the battery corresponds to one meter of heated room.
The sum of the areas of window openings or the value of one window opening in rooms with such vapor barrier should belong to the total area of the room as 1: 8 and 1: 5, respectively.
It should be borne in mind that the distance from the wall to the window should be no more than one meter, this is also characterized by uniform illumination of the room.